Skip to content
Beau's Masonry logoBeau's Masonry
Close-up of fresh tuckpointing on brick mortar joints

Kansas City masonry sealing

Masonry waterproofing and sealing in Kansas City.

Water is what wears masonry out. Beau’s Masonry repairs the joints and cracks that let water in, then seals brick, stone, and block walls when the wall needs it — for Kansas City homes and buildings.

BBB Accredited Business
“Don't spend time reading my review when you could be hiring Beau that much quicker. Beau was recommended by our contractor when we moved into our house a year and a half ago. We've used him for three jobs. We had a home inspection (unrelated) and he even commented he's seen hundreds of homes and the tuckpointing in our basement showed great work. I recommend Beau to anyone, and then hope he's not too busy so I can hire him again and again.”
— Hayden Andrews, Google review

Quick estimate

Free estimates. Beau calls you back.

What you get

Masonry waterproofing and sealing

Brick, stone, mortar, and concrete block all soak up some water. A sound wall can handle that because the water dries back out. The trouble starts when water gets in faster than it can leave: through open mortar joints, cracked brick, a cracked chimney crown, or a block wall that was never sealed. In a Kansas City winter that water freezes, expands, and breaks the masonry apart a little more each year.

Keeping water out of masonry is less about one product and more about doing the repairs in the right order. Sealing over failed mortar or cracked brick only traps the problem. So the first step is always to look at the wall and find where water is getting in.

Repair comes first. Failed mortar joints are ground out and repointed with a mortar matched to the brick or stone. Cracked or spalled brick is replaced with the closest match available. Cracked crowns on chimneys are repaired or rebuilt. On stone veneer, water has to be able to drain out of the wall, so flashing and weeps are part of the job.

Then the wall is sealed when it needs it. Brick and stone walls can be treated with a masonry sealer that lets the wall breathe while it sheds water. Concrete block on garages, foundations, retaining walls, and commercial buildings can be painted and sealed with masonry coatings made for block. Prep is most of the work: cleaning the surface, repairing joints, and filling the block so the coating holds up through freeze-thaw.

Not every wall should be sealed. Some older soft brick does better left breathable with sound joints. Beau will tell you whether sealing makes sense for your wall or whether repair alone is the better call.

Common jobs include brick walls with worn joints and water staining, chimneys taking on water, block garage and basement walls that stay damp, and stone and brick foundations that need repointing. This is masonry work on the wall itself — joints, brick, stone, block, and coatings.

Sealing and waterproofing work is done in Kansas City, MO and across the metro on both sides of the state line. Call or send the address and a few photos of the wall.

  • On-site look and a clear scope
  • Work matched to the existing masonry where it needs to match
  • Clean jobsite when Beau leaves

Finished work

Recent jobs

Full gallery
Close-up of fresh tuckpointing on brick mortar jointsBrick front stoop with soldier-course stepsSplit-face CMU wall with capstones

FAQ

Before you call

How soon can you look?
Usually within a few days for an estimate. Call or send the address and a couple of photos.
Do you seal over the old mortar?
No. Failed joints and cracked brick get repaired first. Sealing over damage only traps the water.
Can you seal a concrete block wall?
Yes. Block garages, foundations, retaining walls, and commercial walls can be painted and sealed with masonry coatings made for block, after the joints are repaired and the block is filled.

Related services

Get an estimate

Call (573) 418-8426 or send the estimate form. Name, phone, the address, and a photo if you have one.

Call (573) 418-8426